Home > Exhibition > Content

Improving the working efficiency of Axial Fan and keeping it Clean

Sep 12, 2018

The operating environment of the axial flow fan should be kept clean, the surface of the fan should be kept clean, the entrance and exit of the equipment should not be sundries, and the dust and other debris in the fan and pipe should be eliminated regularly to a certain extent. If there is any abnormal sound in the process of operation, the axial fan should stop and check immediately. In order to ensure the safety, it is not allowed to carry out maintenance in the operation of the fan. After inspection and repair should carry on the trial operation about 5 minutes, confirms no abnormal phenomenon to start up again.

In the process of using the axial fan, it is necessary to check the lubricating oil supply of the iq bearing regularly. It is suggested that the bolts of the end cover be tightened a little while in operation. If this is not possible, the new packing may have to be replaced. Check the fastness of motor and housing connection bolt regularly, check that the vibration absorber and foundation connection are in good condition. Regular removal of leaf surface area ash, dirt.


How to improve the working efficiency of Axial Fan

1. Installation: when installing, pay attention to whether the ground is flat, whether the axial fan is installed correctly, and whether the speed of the axial fan reaches the specified speed.

2. Standard use: axial fan before operation, to determine whether the wind pressure is rated voltage, no foreign body in the fan.

3. Maintenance: axial fan bearing maintenance, whether to add lubricating oil on time, avoid contact with water and other liquids.http://www.jnblower.com/